Table of Contents
Advertisement
150 en | Configuring the AutoDome Junior HD
Time periods
You can change the names of the recording profiles.
1.
2.
Activating the Recording
After completing configuration you must activate the recording
scheduler and start the recording. The configuration can be
modified at any time.
You can stop the recording activity at any time and modify the
settings.
1.
2.
Recording status
The graphic indicates the recording activity of the AutoDome
Junior HD. You will see an animated graphic while recording is
taking place.
12.35
Recording Status
Certain details on the recording status are displayed here for
information purposes. You cannot change any of these settings.
12.36
Advanced Mode: Alarm
12.37
Alarm Connections
You can select how the AutoDome Junior HD responds to an
alarm. In the event of an alarm, the unit can automatically
connect to a pre-defined IP address. You can enter up to ten IP
addresses to which the AutoDome Junior HD will connect in
sequence in the event of an alarm, until a connection is made.
Connect on alarm
Select On so that the AutoDome Junior HD automatically
connects to a predefined IP address in the event of an alarm.
F.01U.275.803 | 6.0 | 2012.11
Click a profile and then the Rename button.
Enter your chosen name and then click the Rename button
again.
Click the Start button to activate the recording scheduler.
Click the Stop button to deactivate the recording
scheduler. Running recordings are interrupted.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
