Table of Contents
Advertisement
148 en | Configuring the AutoDome Junior HD
Recording includes
You can specify whether, in addition to video data and
metadata (for example alarms, VCA data and serial data) should
also be recorded. Including metadata could make subsequent
searches of recordings easier but it requires additional memory
capacity.
CAUTION!
Without metadata, it is not possible to include video content
analysis in recordings.
12.33
Retention Time
You can specify the retention times for recordings. If the
available memory capacity of a medium has been used, older
recordings are only overwritten if the retention time entered
here has expired.
NOTICE!
Make sure that the retention time corresponds with the
available memory capacity. A rule of thumb for the memory
requirement is as follows: 1 GB per hour retention time with
4CIF for complete frame rate and high image quality.
Retention time
Enter the required retention time in hours or days for each
recording. Recording 1 corresponds to Stream 1, Recording 2
corresponds to Stream 2.
12.34
Recording Schedule
The recording scheduler allows you to link the created
recording profiles with the days and times at which the
camera's images are to be recorded in the event of an alarm.
You can link any number of 15-minute intervals with the
recording profiles for each day of the week. Moving the mouse
cursor over the table displays the time below it. This aids
orientation.
F.01U.275.803 | 6.0 | 2012.11
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
