Table of Contents
Advertisement
104 en | Using the IP Interface
11.7
Saving Snapshots
You can save individual images from the video sequence
currently shown on the Livepage in JPEG format on your
computer's hard drive. The icon for recording single images is
only visible if the unit is configured to enable this process.
11.8
Recording Video Sequences
You can save sections of the video sequence currently shown
on the Livepage on your computer's hard drive. The icon for
recording video sequences is only visible if the unit is
configured to enable this process.
1.
2.
3.
NOTICE!
You can play back saved video sequences using the Player from
Bosch Security Systems, which can be installed from the
product CD supplied.
Image Resolution
Sequences are saved at the resolution that has been preset in
the configuration for the encoder (see Section 12.3 Basic Mode:
Network, page 111).
F.01U.275.803 | 6.0 | 2012.11
Click the icon. The storage location depends on the
configuration of the AutoDome Junior HD.
Click the icon to start recording. The storage location
depends on the configuration of the AutoDome Junior HD.
A red dot in the icon indicates that recording is in
progress.
Click the icon again to stop recording.
To change the storage location for the recorded video,
navigate to the Livepage settings on the Settings page.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
