Table of Contents
Advertisement
102 en | Using the IP Interface
11.5.2
Using Special Functions
The AutoDome offers several special command buttons on the
Livepage.
Scan 360
Click this button to start a continuous 360° pan. To stop the
continuos pan, click a directional control in the View Control
tab.
Autopan
Click this button to pan the AutoDome between user-defined
limits. To set the left and right pan limits, refer to
Section 12.22 PTZ Settings, page 137, so set the Autopan limits.
To stop the continuos pan, click a directional control in the
View Control tab.
Tour A / Tour B
Click one of these buttons to start the playback of a recorded
(guard) tour. A Recorded Tour saves all manual camera
movements made during the recording, including its rate of
pan, tilt and zoom speeds and other lens setting changes. Refer
to Section 12.22 PTZ Settings, page 137, to program a recorded
tour. To stop a tour, click a directional control in the View
Control tab.
F.01U.275.803 | 6.0 | 2012.11
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
