Table of Contents
Advertisement
168 en | Configuring the AutoDome Junior HD
HTTP browser port
Select a different HTTP browser port from the list if required.
The default HTTP port is 80. If you want to allow only secure
connections via HTTPS, you must deactivate the HTTP port. In
this case, select Off.
HTTPS browser port
If you wish to allow browser access on the network via a secure
connection, select an HTTPS browser port from the list if
necessary. The default HTTPS port is 443. Select the Off option
to deactivate HTTPS ports; only unsecured connections will
now be possible.
The AutoDome 800 Series uses the TLS 1.0 encryption
protocol. You may have to activate this protocol via your
browser configuration. You must also activate the protocol for
the Java applications (via the Java control panel in the
Windows control panel).
NOTICE!
If you want to allow only secure connections with SSL
encryption, you must select the Off option for each of the
parameters HTTP browser port, RCP+ port 1756 and Telnet
support. This deactivates all unsecured connections.
Connections will then only be possible via the HTTPS port.
You can activate and configure encryption of the media data
(video and metadata) on the Encryption page (see
Section 12.47 Advanced, Page 170).
RCP+ port 1756
To exchange connection data, you can activate the unsecured
RCP+ port 1756. If you want connection data to be transmitted
only when encrypted, select the Off option to deactivate the
port.
Telnet support
If you want to allow only secure connections with encrypted
data transmission, you must select the Off option to deactivate
F.01U.275.803 | 6.0 | 2012.11
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
