Table of Contents
Advertisement
28
en | Installing a Surface Mount
CAUTION!
You must ensure that the gasket is attached to the retaining
ring as shown above to ensure an environmentally tight seal.
7.
F.01U.275.803 | 6.0 | 2012.11
b.
Thread the flat side of the gasket (item 1, below) onto
the recessed side of the retaining ring (item 2). The
illustration below shows a cross-section of the gasket
on the retaining ring.
Attach the retaining ring with gasket (item 2, below) to the
Surface Mount Adapter. These parts are supplied with the
AutoDome Junior Outdoor Camera. Ensure that the side of
the retaining ring with the counter-sunk screw holes is
facing you.
Figure 4.6 O-ring and retaining ring placement for outdoor
installation
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
