Table of Contents
Advertisement
AutoDome Junior HD
Operations Mode
Select an operating mode for the relay.
For example, if you want an alarm-activated lamp to stay on
after the alarm ends, select Bistable. If you wish an alarm-
activated siren to sound for ten seconds, for example, select
10s.
Relay Name
You can assign a name for the relay here. The name is shown on
the button next to Trigger relay. The Livepage can also be
configured to display the name under the relay icon.
Furthermore, in the Forensic Search program, you can use the
name as a filter option for quick search through the recordings.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal
recording management and may therefore result in the Player or
Archive Player programs being unable to play back the
recording.
Trigger Relay
Click the button to trigger the relay manually (for testing or to
operate a door opener, for example).
12.45
Advanced Mode: Network
12.46
Network Access
The settings on this page are used to integrate the AutoDome
800 Series into an existing network.
Some changes only take effect after the unit is rebooted. In this
case, the Set button changes to Set and Reboot.
1.
2.
Bosch Security Systems, Inc.
Make the desired changes.
Click the Set and Reboot button. The AutoDome 800
Series is rebooted and the changed settings are activated.
Installation Manual
Configuring the AutoDome Junior HD | en 165
F.01U.275.803 | 6.0 | 2012.11
Advertisement
Table of Contents
