Table of Contents
Advertisement
162 en | Configuring the AutoDome Junior HD
12.41
Alarm Rules
The AutoDome Junior HD features an alarm rule engine. In its
simplest form, an alarm rule can define which input(s) activate
which output(s). Basically, an alarm rule allows you to
customize an AutoDome Junior HD to automatically respond to
different alarm inputs.
To configure an alarm rule specify one input from either a
physical connection, a motion detection trigger, or from a
connection to the camera's Livepage. The physical input
connection can be activated by dry contact devices such as
pressure pads, door contacts and similar devices.
Next, specify up to two (2) rule outputs, or the camera's
response to the input. Outputs include a physical alarm relay,
an AUX command, or a preposition scene.
1.
2.
F.01U.275.803 | 6.0 | 2012.11
Click the Enabled check box to activate the alarm.
Choose one of the following alarm inputs:
–
Local Input 1: a physical alarm connection.
–
Local Input 2: a physical alarm connection.
–
IVA/MOTION+: an alarm when IVA or motion detection
is activated.
–
Connection: an alarm when an attempt is made to
access the camera's IP address.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
