Table of Contents
Advertisement
AutoDome Junior HD
8.
Bosch Security Systems, Inc.
Figure 7.4 O-ring and retaining ring placement for outdoor
installation
1
O-ring; 21.82 mm I.D. by Ø3.00 mm
2
Dome Cap
3
Retaining ring with gasket
4
M3 – .5 x 6 Phillips flat head machine screws
a.
Thread the 21.82 mm I.D. by Ø3.00 mm O-ring (item 1,
above) onto the lower pipe threads.
b.
Secure the retaining ring gasket (item 2, above) to the
dome cap with the three (3) M3 – .5 x 6 Phillips flat
head machine screws. Ensure that the side of the
retaining ring with the counter-sunk screw holes is
facing you.
Secure the flange using four (4) appropriate user-provided
fasteners such as Moly or Toggle bolts.
Outdoor Installation: Place the flat gasket (item 1, below)
between the flange and the surface before securing.
Installation Manual
Installing a Pipe Mount | en
F.01U.275.803 | 6.0 | 2012.11
71
Advertisement
Table of Contents
