AutoDome Junior HD
CAUTION!
You must ensure that the gasket is attached to the retaining
ring as shown above to ensure an environmentally tight seal.
Bosch Security Systems, Inc.
a.
Locate the flat side of the gasket and the recessed
side of the retaining ring.
b.
Thread the flat side of the gasket (item 1, below) onto
the recessed side of the retaining ring (item 2). The
illustration below shows a cross-section of the gasket
on the retaining ring.
Installation Manual
Installing a Wall Mount | en
F.01U.275.803 | 6.0 | 2012.11
39