Table of Contents
Advertisement
146 en | Configuring the AutoDome Junior HD
1.
2.
3.
4.
Standard recording
Here you can select the mode for standard recordings.
f you select Continuous, the recording proceeds continuously. If
the maximum memory capacity is reached, older recordings will
automatically be overwritten. If you select the Pre-alarm option,
the device uses a special recording mode for optimal usage of
storage capacity: as soon as a time gap for alarm recording
begins, a recording is continuously made on one segment,
which is the size of a complete alarm sequence (pre- and post-
alarm time).
This segment functions in a similar manner to a ring buffer and
is overwritten until an alarm is actually triggered. Then,
recording occurs on the segment only for the duration of the
preset post-alarm time and a new segment is subsequently
used in the same manner.
If you select Off, no automatic recording takes place.
CAUTION!
You can specify limitations for overwriting older recordings in
Continuous mode by configuring the retention time (see
Section 12.33 Retention Time, page 148).
F.01U.275.803 | 6.0 | 2012.11
Click one of the tabs to edit the corresponding profile.
If necessary, click the Default button to return all settings
to their default values.
Click the Copy Settings button if you want to copy the
currently visible settings to other profiles. A new window
will open and you can select the profiles in which you want
to copy the settings.
For each profile, click the Set button to save the settings in
the unit.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
