Table of Contents
Advertisement
70
en | Installing a Pipe Mount
6.
CAUTION!
You must ensure that the gasket is attached to the retaining
ring as shown above to ensure an environmentally tight seal.
7.
F.01U.275.803 | 6.0 | 2012.11
Outdoor Installation: Ensure that the gasket is attached to
the retaining ring. If the gasket and the retaining ring are
separate:
a.
Locate the flat side of the gasket and the recessed
side of the retaining ring.
b.
Thread the flat side of the gasket (item 1, below) onto
the recessed side of the retaining ring (item 2). The
illustration below shows a cross-section of the gasket
on the retaining ring.
Fit the dome cap to the bottom of the pipe.
Outdoor Installation: Apply the following O-ring and the
retaining ring (supplied with the AutoDome Junior Outdoor
Camera) to the locations specified below:
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
