Snmp Communities - Comtech EF Data CDM-Qx Installation And Operation Manual

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Front Panel Operation
possible. Press ENTER when done. Note that the asynchronous character format is FIXED
at 8-N-1: 8 data bits, 1 stop bit, no parity.)
5.4.1.3 CONFIG: Remote
Ethernet Config:
Gateway Address MAC SNMP
Select Gateway, Address, MAC, or SNMP using the
CONFIG: Remote
M&C Ethernet IP Gateway:
192.128.001.001
Edit the IP Gateway Address for the Ethernet M&C port for this unit by first selecting the digit
to be edited using the
the arrow keys. Press ENTER when done.
CONFIG: Remote
M&C Ether IP Address/Range:
192.168.001.001/24(◄ ►,▲ ▼,ENT)
Edit the IP Address and Range for the Ethernet M&C port for this unit by first selecting the
digit to be edited using the
using the
CONFIG: Remote
As shown in this example, this read-only window displays the factory program MAC address
for the Ethernet management interface.
CONFIG: Remote
SNMP: Communities Traps
Select Communities or Traps using the
CONFIG: Remote

SNMP Communities:

Read Write
Select Read or Write using the
CONFIG: Remote
Ethernet
(◄ ►,ENT)
Ethernet
(◄ ► ▲ ▼,ENT)
arrow keys, then change the value of the digit to be edited by using
Ethernet
arrow keys, then change the value of the digit to be edited by
arrow keys. Press ENTER when done.
Ethernet
M&C Port MAC Address:
00-06-B0-00-00-D5
Ethernet
Ethernet
◄ ►
Ethernet
Read Community: (◄ ► ▲ ▼,ENT)
public
arrow keys, then press
◄ ►
Gateway
Address
MAC
SNMP
(◄ ►,ENT)
arrow keys, then press
◄ ►
SNMP
(◄ ►,ENT)
arrow keys, then press
SNMP
5–11
Revision 7
MN/CDMQX.IOM
ENTER
.
ENTER
Communities
.
ENTER
Communities Read
.