B.2.4.2 Entering The Installed Module Fast Code; B.2.4.3 Entering The Installed Module Tpc Board Fast Code - Comtech EF Data CDM-Qx Installation And Operation Manual

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Appendix B
Press or
ENTER
persists, contact Comtech EF Data Customer Support for further assistance.

B.2.4.2 Entering the Installed Module FAST CODE

Having selected MAIN MENU: Utility
Slot#2,Slot #3 orSlot #4):
FAST - Slot#1: Mod
Depending on the type of module (modulator or demodulator) that has been installed into the
chosen Slot, select Mod or Demod using the
FAST: Config
Board S/N: 223456789
Select Config using the
FAST Configuration:
Edit Code
Select Edit Code using the
Edit 20 digit FAST Code:
00000000000000000000
Enter the 20-digit FAST code that was obtained from Comtech EF Data carefully. The procedure
and user prompts are identical to those outlined for the Base Unit FAST Code entry.

B.2.4.3 Entering the Installed Module TPC Board FAST CODE

Having selected MAIN MENU: Utility
Slot#2,Slot #3 orSlot #4):
FAST - Slot#1: Mod
Typical for either a modulator or demodulator module, select Turbo using the
then press
ENTER
FAST: Config
Board S/N: 423456789
Select Config using the
FAST Configuration:
Edit Code
Select Edit Code using the
Edit 20 digit FAST Code:
00000000000000000000
Enter the 20-digit FAST code that was obtained from Comtech EF Data carefully. The procedure
and user prompts are identical to those outlined for the Base Unit FAST Code entry.
to return to the previous menu, and re-enter the code. If the problem
CLEAR
(▲ ▼,ENT)
View
◄ ► arrow keys, then press
Demo Mode
◄ ► arrow keys, then press
(▲ ▼,ENT)
.
View
◄ ► arrow keys, then press
Demo Mode
◄ ► arrow keys, then press
FAST Slot# (where # denotes the selected Slot#1,
Turbo
◄ ► arrow keys, then press
(Mod#1)
.
ENTER
.
ENTER
(ENT)
FAST Slot# (where # denotes the selected Slot#1,
Turbo
(TPC#1)
.
ENTER
.
ENTER
(ENT)
B–6
Revision 7
MN/CDMQX.IOM
.
ENTER
◄ ► arrow keys,