Table of Contents
Advertisement
2.1
Unpacking
The CDM-Qx/QxL Satellite Modem and its Installation and Operation Manual are packaged and
shipped in a pre-formed, reusable cardboard carton containing foam spacing for maximum
shipping protection.
Do not use any cutting tool that extends more than 1" into the container and
cause damage to the unit.
CAUTION
Be sure to keep all shipping materials for the carrier's inspection.
IMPORTANT
Unpack and inspect the CDM-Qx/QxL as follows:
Step
Inspect shipping containers for damage. If shipping containers are damaged, keep
1
them until the contents of the shipment have been carefully inspected and
checked for normal operation.
2
Remove the packing list from the outside of the shipping carton.
Open the carton by cutting the tape at the top of the carton (indicated by
3
THIS END
Remove the cardboard/foam space covering the modem. Remove the modem,
4
manual and power cord from the carton.
Check the contents against the packing list to verify completeness of the
5
shipment.
Inspect the equipment for any possible damage incurred during shipment. If
6
damage is evident, contact the carrier and Comtech EF Data immediately and
submit a damage report.
7
Refer to the following sections for further installation instructions.
Chapter 2. INSTALLATION
).
Procedure
2–1
OPEN
Advertisement
Table of Contents
Need help?
Do you have a question about the CDM-Qx and is the answer not in the manual?
Questions and answers