B.2.2.2 View Installed Module (Mod/Demod, Turbo) Fast Features - Comtech EF Data CDM-Qx Installation And Operation Manual

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Appendix B

B.2.2.2 View Installed Module (Mod/Demod, Turbo) FAST Features

Select MAIN MENU: Utility
FAST - Slot#2: Demod
Depending on the installed module, select Mod (Demod) or Turbo using the
then press
ENTER
1. If Mod (Demod) is selected (a Demod module is shown in this example):
FAST: Config
Board S/N: 323456789
Select View using the
View Options: 02
1:2 Redun
Use the
▲ ▼
Installed for mod/demod operation. Any feature identified as Not Installed may be
purchased from Comtech EF Data. Press
Note the following (typical for either modulator or demodulator modules):
View Option No.
(Top Line)
01
02
03
04
05
06
07
08
09
2. If Turbo is selected:
View Options: 03
5M Turbo
Use the
▲ ▼
Installed for TPC operation. Any feature identified as Not Installed may be
purchased from Comtech EF Data. Press
Note the following (typical for either modulator or demodulator modules):
View Option No.
(Top Line)
01
02
03
04
05
06
07
Fast
(▲ ▼,ENT)
.
View
◄ ► arrow keys, then press
(▲ ▼,ENT)
- Installed
arrow keys to display which FAST options are either Installed or Not
FAST Option Name
(Bottom Line)
TPC Codec
Future H/W
5Mbps Card
10Mbps Card
20Mbps Card
8-PSK
16-QAM
Future H/W
Future S/W
(▲ ▼,ENT)
- Installed
arrow keys to display which FAST options are either Installed or Not
FAST Option Name
(Bottom Line)
Future S/W
Future S/W
5M Turbo
10M Turbo
20M Turbo
Future H/W
Future S/W
Slot# using the ◄ ► arrow keys, then press
Turbo
(Dem#2)
.
ENTER
when done.
ENTER
Description
when done.
ENTER
Description
B–4
Revision 7
MN/CDMQX.IOM
.
ENTER
◄ ► arrow keys,