Installing The Front Panel I/O Cable Assembly - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Installing the front panel I/O cable assembly

To install he front panel I/O cable assembly:
1. With power removed and the chassis open, guide the front panel I/O cable assembly cables through
the chassis openings from which they were removed.
2. Place the front panel I/O cable assembly in the chassis and slide it up into position as shown in the
following figure
Figure 5-18
3. Connect the front panel I/O cable assembly cables to the system board as shown in the following
figure.
Figure 5-19
Table 5-5
Item
1
2
3
ENWW
. Install the screw
Installing the front panel I/O cable assembly
Connecting the front panel I/O cable assembly cables
Connecting the front panel I/O cable assembly cables
Description
Front audio
Front 1394a
Front USB
.
2
Removing and installing components 89