Disassembly Order - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Disassembly order

For convenience, disassembly procedures should be followed in a particular order. Use the following
table to determine the sequence in which to remove major workstation components.
Table 5-3 Workstation component disassembly order
Predisassembly procedures on page 74
Cable lock (optional) on page 75
ENWW
Side access panel on page 76
Airflow guide on page 77
Expansion card support on page 78
Right side panel on page 81
Power supply on page 81
Speaker on page 82
Side access panel sensor (optional) on page 83
Power connections on page 85
Front bezel on page 86
Front panel I/O cable assembly on page 87
Power switch cable assembly on page 91
Optical bay filler tray on page 92
Optical disk drive on page 95
Slot load optical disk drive (optional) on page 100
Hard disk drive on page 106
Expansion card guide/front fan holder on page 127
System fans on page 131
Installing a second front system fan on page 133
Memory fans on page 137
Memory on page 139
Expansion card slot identification on page 145
Choosing an expansion card slot on page 147
CPU heatsink on page 172
Battery on page 180
PCIe card on page 148
PCI card on page 151
CPU on page 176
System board on page 178
Removing and installing components 73