Removing And Installing Components - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Removing and installing components

NOTE: This workstation supports many optional devices. If you do not find installation instructions for
your device in the following procedures, see http://hp.com/support/workstation_manuals.
This section includes these topics:
Component locations on page 71
Disassembly order on page 73
Predisassembly procedures
on page 74
Cable lock (optional) on page 75
Side access panel on page 76
Airflow guide on page 77
Expansion card support on page 78
Right side panel on page 81
Power supply on page 81
Speaker on page 82
Side access panel sensor (optional)
on page 83
70 Chapter 5 Replacing components
Topics
Power connections on page 85
Front bezel on page 86
Front panel I/O cable assembly on page 87
Power switch cable assembly on page 91
Optical bay filler tray on page 92
Optical disk drive on page 95
Slot load optical disk drive (optional) on page 100
Hard disk drive on page 106
Expansion card guide/front fan holder on page 127
System fans on page 131
Installing a second front system fan on page 133
Memory fans on page 137
Memory on page 139
Expansion card slot identification
on page 145
Choosing an expansion card slot
on page 147
PCIe card on page 148
PCI card on page 151
Liquid cooling solution on page 154
CPU heatsink on page 172
CPU on page 176
System board on page 178
Battery on page 180
ENWW