HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual page 146

3. Insert the fan cable under the fan holder hooks
Rotate the fan near the retention tab and press it until it snaps into place
Figure 5-80
4. Guide the fan cable under the cable retention clamps as shown in the following figure.
Figure 5-81
5. Install the expansion card guide/front fan holder in the chassis (see
guide/front fan holder on page
134 Chapter 5 Replacing components
Inserting the fan in the holder
Routing the fan cable
130).
as shown in the following figure.
2
Installing the expansion card
in the fan holder.
ENWW