declares that the product
Regulatory Model Number: FCLSA-0803
conforms to the following Product Specifications and Regulations:
IEC 60950-1:2001 / EN 60950-1:2001+A11:2004
IEC 60825-1:1993/A2:2001 / EN 60825-1:1994 + A1:2002 + A2:2001 Class 1
EN 55022:2006 Class B
U.S.A. FCC Part 15, Class B
Japan VCCI Class B
Australia/New Zealand AS/NZS CISPR22:2006 Class B
China GB9254-1998 / GB17625.1-2003 Harmonic
EC No. R1275/2008 / IEC 62301:2005
and is certified or verified by:
culus UL Listed to UL60950-1:2006, CSA C22.2 No. 60950-1-03 File E146385
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC and the Energy Use Directive 2005/32/EC and carries the CE-marking accordingly.
This product is assigned a Regulatory Model Number (RMN) which stays with the regulatory aspects of the
design. The RMN is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
This product was tested in a typical Hewlett Packard computer configuration. .
Fort Collins, CO, U.S.A.
For Compliance Information ONLY, contact:
European contact: Hewlett-Packard, HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen
Americas contact: Hewlett-Packard, WGBU Quality Manager, 3404 E. Harmony Rd., Ft. Collins, CO 80528, U.S.A.
(FAX: (970) 898-4556)
according to ISO/IEC 17050-1 and EN 17050-1
3404 East Harmony Road
Fort Collins, CO 80528
z800 Computer Workstation
With 850W or 1110W Power Supply