HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual page 137

9. Carefully squeeze the green tabs
in the following figure
Figure 5-68
10. Lift and hold the drive release latch at the green touch point
optical bay as shown in the following figure
release the latch, but continue to slide the bracket inward until the latch closes and engages the
bracket.
Figure 5-69
Repeat the steps above to install a second drive.
ENWW
while sliding the drive with rails into the drive bracket as shown
.
2
Installing the drive in the optical bay bracket
Installing the bracket in the optical bay
while sliding the bracket into the
. When the front of the bracket is near its final position,
2
Removing and installing components 125