Installing The Battery; Product Recycling - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Installing the battery

1. Confirm the polarity (positive or negative) of the battery to position it correctly in the battery holder.
2. Place the battery edge under the plastic housing tab and press gently until it snaps into place.
3. Reinstall all removed components and reconnect any cables that have been disconnected.

Product recycling

HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries.
For information about recycling HP components or products, see http://www.hp.com/go/recycle.
182 Chapter 5 Replacing components ENWW