Memory Fans; Removing The Memory Fans - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Memory fans

This section describes how to remove and install the memory fans.

Removing the memory fans

1. Disconnect power from the workstation (see
2. Remove the side access panel (see
3. Remove the airflow guide (see
4. Grasp the sides of the memory fan assembly
with your index fingers as shown in the following figure.
2
Figure 5-85
5. Lift the memory fan assembly upward, out of the chassis as shown in the following figure.
Figure 5-86
ENWW
Removing the airflow guide on page
Releasing the memory fan assembly
Removing the memory fan assembly
Predisassembly procedures on page
Removing the side access panel on page
and press the memory fan assembly release tabs
Removing and installing components 137
74).
76).
77).