Copying A Setup Configuration To Multiple Workstations - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

Hp z800 workstation maintenance and service guide
Hide thumbs Also See for Z800 - Workstation - 6 GB RAM:
Table of Contents

Advertisement

Copying a setup configuration to multiple workstations

CAUTION:
model, file system corruption might result.
This method takes longer to prepare the configuration diskette, but copying the configuration to target
workstations is fast.
A bootable diskette is required for this procedure. If the Windows XP Professional operating system is
not available to create a bootable diskette, use the method for copying to a single workstation instead
(see
Copying a setup configuration to a single workstation on page
1.
Create a bootable diskette or USB media device.
2.
Select a setup configuration to copy.
3.
If you are using a diskette or USB, insert it now.
4.
Restart the workstation.
5.
As soon as the workstation powers on, press and hold
(F10) Utility. If necessary, press
NOTE:
and then press and hold the
If you are using a PS/2 keyboard, you might see a keyboard error message. Disregard it.
6.
Select File>Replicated Setup>Save to Removable Media, and follow the instructions on the
screen to create the configuration diskette or USB media device.
7.
Download a BIOS utility for replicating the setup (such as repset.exe), and copy it to the
configuration diskette or USB media device. To obtain this utility, see
files.
8.
Enter the model number of the workstation.
9.
On the configuration diskette, create an autoexec.bat file containing repset.exe and
cpqsetup.txt.
10.
Power off the workstation you are configuring, insert the configuration diskette or USB device, and
then power on the workstation. The configuration utility runs automatically.
11.
When the configuration is complete, restart the workstation.
ENWW
A setup configuration is model-specific. If source and target workstations are not the same
If you do not press the
F10
F10
Enter
to bypass the title screen.
F10
key at the appropriate time, you must restart the workstation,
key again to access the utility.
44.)
until you enter the Computer Setup
http://www.hp.com/support/
Workstation management
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z800

Table of Contents