c.
Ensure that the front and rear mounting tabs are fully seated as shown in the figure below.
Figure 5-121
For proper installation, the LCS duct tabs sit above the surface of the main airflow guide as
shown in the following figure.
15.
Install the airflow guide (see
16.
Install the expansion card support (see
NOTE:
airflow guide, you must install the air flow guide.
17.
Reinstall all removed components and reconnect any disconnected cables.
ENWW
Positioning the LCS air duct
Installing the airflow guide on page
Before you install the expansion card support, when the LCS air duct is installed in the
Installing the expansion card support on page
Removing and installing components 171
78).
80).