Diagnostics And Troubleshooting On; System Fans; Resetting The Power Supply - HP Z800 - Workstation - 6 GB RAM Maintenance And Service Manual

See the Site preparation guide for the HP
workstation_manuals
This product is in compliance with U.S. Executive Order 13221.

System fans

This workstation includes:
●
Two rear system fans
●
One CPU0 fan
● One CPU1 fan (optional)
●
Two power supply fans
●
Two memory fans
●
One upper front system fan
●
One lower front system fan (optional)
In addition, some graphics cards include onboard fans.

Resetting the power supply

If an overload triggers the power supply overload protection, power is immediately disconnected.
To reset the power supply:
1. Disconnect the power cord from the workstation.
2. Determine what caused the overload and fix the problem. For troubleshooting information, see
Diagnostics and troubleshooting on page
3. Reconnect the power cord and restart the workstation.
When you power off the workstation through the operating system, power consumption falls below what
is considered low power consumption but does not reach zero. This low power consumption feature
extends the life of the power supply.
12 Chapter 1 Workstation overview
800 workstation at
for further power consumption information.
http://hp.com/support/
183.
ENWW