Installing the DIMM
NOTE:
For best performance add DIMMs of the same size in pairs across CPUs.
1.
Disconnect power from the workstation (see
2.
Remove the side access panel (see
3.
Remove the airflow guide (see
4.
Remove the memory fans (see
5.
Push outward on the DIMM socket levers as shown in the following figure.
Figure 5-91
ENWW
Removing the airflow guide on page
Removing the memory fans on page
Opening DIMM socket levers
Predisassembly procedures on page
Removing the side access panel on page
Removing and installing components 143
74).
76).
77).
137).