HP Z800 - Workstation - 6 GB RAM Installation

HP 800 Workstation Second Front System

Fan installation

Introduction
This document describes how to install a second front system fan in an HP
To view QuickSpecs and determine the compatibility of this product with your HP workstation, see
http://www.hp.com/go/productbulletin.

Kit contents

●
Fan for an HP
●
Warranty information
●
Installation instructions (this document)

Warnings and cautions

WARNING!
of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed
area marked with this symbol.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce
the risk of injury from a hot component, enable the surface to cool before touching.
CAUTION:
beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal
object.
ENWW
800 Workstation
Any surface or area of the equipment marked with this symbol indicates the presence
To reduce the risk of electric shock or damage to your equipment:
Any surface or area of the equipment marked with this symbol indicates the presence
Static electricity can damage the electronic components of the workstation. Before
© 2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.
800 Workstation.
Introduction 1