Panasonic AJ-HPD2500 Operating Instructions Manual page 89

19.
REC button
Finalizes an edit operation, registers the event and
displays it on the timeline. Imports video to a P2 card
from an external device (RS-422A) or hard disk used
as the player.
Use the REC + PLAY button during playback in the
A.DUB mode to start voice-over recording.
➝Refer to "Recording Voice-Overs" (page 106).
20.
PREVIEW/A LEVEL REC buttons
PREVIEW button
Use this button to preview playback of event that is
being registered. Before the preview, the event is
registered and appears on the timeline. When the
player is a P2 card, the level changes made using the
audio level control during a preview are set in a
registered event.
➝Refer to "Setting Audio Level" (page 109).
◆ NOTE:
• Events created from external devices or hard disks are
indicated in orange as temporarily registered events.
A LEVEL REC (SHIFT + PREVIEW) button
Press this button to enable adjustment of the audio
level with the audio level control simultaneous with a
preview of the IN and OUT points of the recorder. This
mode allows you to dynamically change the audio level
in the event.
➝Refer to "Setting Audio Level" (page 109).
21.
SHIFT button
This button is used in combination with other buttons.
22.
REC/UNITY/PB selection switch and audio level
controls
Select recording (REC position) or playback (PB
position) by the selection switch and adjust the levels
of audio signals by the audio level controls for audio
recording/playback and voice-over recording (sound
mixed with playback sound).
◆ NOTE:
• Levels cannot be adjusted during playback of a playlist.
89
Editing: Playlist Function