Basic - Panasonic AJ-HPD2500 Operating Instructions Manual

Video Output Signal Adjustments
The control matrix for adjustments is shown below.
When CMPNT is selected in setup menu No. 650 (STYLE)
Setting Adjustment
05: ENCODER SEL 653: Y LVL
654: Pb LVL
655: Pr LVL
656: BK LVL
LOCAL This unit
BOTH External encoder remote controller/this unit
This unit:
Only setup menu adjustments are available.
External encoder remote controller/this unit:
External encoder remote controller and setup menu
adjustments are available.

BASIC

This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12
and 24-hour clock display, sets superimposed display, character displays in superimposed display, setup menu and other
displays, sets recording formats, sets the formats that can be added to the playlist and sets the time of the internal clock.
Item
FR SUPER
No. DISP.
0000
0001
001 LOCAL ENA
0002
0000
002 CTL DISP
0001
0000
0001
0002
0003
003 REMAIN SEL
Setting
FR SUPER
No. DISP.
DIS Restricts the number of buttons on the key panel that are available when the REMOTE/
STOP LOCAL switch is set to REMOTE.
0: No buttons are available.
ENA
1: Only the STOP button is available.
2: All buttons are available.
12h Switches the CTL counter display between 12 and 24-hour clock display.
±
0: 12-hour clock display
24h
1: 24-hour clock display
OFF Specifies whether to display the remaining time or total time via superimposed display.
2L 0: No display.
1L 1: The second line shows remaining time and total time of the P2 card.
2: The first line shows remaining time and total time of the P2 card.
P2&SD
3: The first line shows remaining time and total time of a P2 card, the second line shows
remaining time on an SD memory card.
NOTE:
• These functions are not displayed when "2L" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
• Total tape time is not displayed when "P2&SD" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
• In the following cases, the remaining time is shown on the second line when a setting
other than OFF is selected.
- When setup menu No.040 (VFR REC) is set to ON
- When setup menu No.041 (LOOP REC) is set to ON
- When setup menu No.155 (AUTO REC) is set to something other than OFF so that
recording and stopping can be performed automatically
• The remaining time for P2 cards is not displayed when no P2 card has been inserted.
• The remaining time for SD memory cards is not displayed when an AJ-YCX250G
AVCHD codec board (optional) has not been installed or an SD memory card has not
been inserted.
When CMPST is selected in setup menu No. 650 (STYLE)
Setting Adjustment
05: ENCODER SEL 662: V LEVEL
663: C LEVEL
664: HUE/C PHASE
665: SETUP/BK LVL
LOCAL This unit
BOTH External encoder remote controller/this unit
This unit:
Only setup menu adjustments are available.
External encoder remote controller/this unit:
External encoder remote controller and setup menu
adjustments are available.
• XX indicates factory default settings.
Settings and brief function description
171
Setup: Item Settings