Changing Settings; Change Operations - Panasonic AJ-HPD2500 Operating Instructions Manual

The menus superimposed on the LCD monitor and a monitor (when the SUPER switch on the upper front panel is set to "ON")
connected to the MON OUT, SD SDI MON OUT or SDI OUT connector make it possible to change settings. Superimposed
information to the output connectors can be selected in setup menu No.005 (SUPER).

Change Operations

2,3
5
5
3
2,3
1
Press the MENU button.
The setup menu screen appears on the LCD monitor and
the counter display indicates the setup menu number.
2
Select the file to change.
Hold down the SHIFT button and press the right cursor
button (a) or the FF button to go to the next file, press
the left cursor button (b) or the REW
the previous file.
3
Select items to change.
Turn the search dial or press the up or down cursor button
(▲/▼) to move the cursor (*) to the item you want to
change.
• Use the search dial in JOG mode.
• Turn the dial clockwise to increment item numbers
(001➝002➝003➝004➝) and counterclockwise to
decrement them.
• To switch to the next item, hold down the PLAY
button and press the FF
switch to a previous item, hold down the PLAY
and press the REW

Changing Settings

4
2 1,5 3,4
button to go to
button or the + button. To
button
button or the – button.
4
Change set values.
Select the item to change, hold down the SEARCH button
and turn the search dial or press the left or right cursor
button (b / a) to change the setting.
• Turn the dial clockwise (or press the right cursor button
(a)) to increment the set number and turn it
counterclockwise (or press the left cursor button (b)) to
decrement it.
• Release the SEARCH button after making the change.
• In the SHTL mode, set the search dial to the center
position or items will move.
• Repeat the operations described in steps 3 and 4 when
there are more items to change.
• Press and hold the SEARCH button and press the RESET
button to reset the set values to the factory defaults.
5
Finalize the change.
Press the MENU button.
In the confirmation message that appears, press the SET
button to accept the change or press the EXIT button to
cancel it. The menu closes after this operation.
Making changes using the PF buttons
2 1,3
165
Setup: Changing Settings