Item Settings; System - Panasonic AJ-HPD2500 Operating Instructions Manual

SYSTEM

The system menu specifies HD SDI and SD SDI outputs, analog composite output, phase adjustment of audio output, system
frequency, phase of SD REF input of HD SDI output, and system file lock.
Item
FR SUPER
No. DISP.
0001
0002
05 ENCODER SEL
0000
1375
12 SYS H(HD)
2750
0000
0128
14 SYS SC(SD)
0255
0000
0864
15 SYS H(SD)
1728
0000
0001
18 SCH COAR(SD)
0002
0003

Item Settings

Setting
FR SUPER
No. DISP.
LOCAL
Determines whether video output signal adjustments will be made on this unit or on an
external encoder remote controller.
BOTH
LOCAL: Video output signal adjustments are performed on this unit.
BOTH: Video output signal adjustments are either performed on this unit or on an encoder
remote controller.
NOTE:
• An RS-422A digital controller is available as an encoder remote controller.
• For details on adjustments, refer to "Video Output Signal Adjustments" (page 171).
• When adjustments are made on an external encoder remote controller, the
adjustment values are reflected to adjustment parameters in setup menus. Note that
it takes 1 min after completing adjustments for values reflected to adjustment
parameters to be saved. Thus when adjustments using an external encoder remote
controller are completed, wait 1 minute or more before turning off the unit.
–1375 Adjusts system phase of a HD SDI output (in 13.5 ns steps).
| | –: Advances the phase.
0 +: Delays the phase.
| |
NOTE:
1375
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
–128
59.94Hz
| |
Adjusts the system phase of the analog composite output and SD SDI output (total
0
variable range: ±180°).
| |
NOTE:
127
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
–864
59.94Hz
| |
Adjusts system phase of analog composite output and SD SDI output (in 37 ns steps).
0
–: Advances the phase.
| |
+: Delays the phase.
864
NOTE:
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
0
59.94Hz
90
Adjusts the SCH phase of analog composite output (four 90° positions).
180
Changes the SC phase but not the H phase.
270
• XX indicates factory default settings.
Settings and brief function description
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
60-25Hz only
60-25Hz only
60-25Hz only
Setup: Item Settings
169