Panasonic AJ-HPD2500 Operating Instructions Manual page 186

Item
FR SUPER
No. DISP.
680 CC (F1) BLANK
681 CC (F2) BLANK
684 EDH(SD)
685 ESR MODE(SD)
688 CC REC
689 COMP MODE
690 UMID REC
691 UMID GEN
692 UMID POS
186
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 BLANK
59.94Hz
0001 THRU
Turns on and off closed caption signals in the first field output from the SD SDI and analog
composite output during playback.
0: Signals are forcibly blanked.
1: Signals are not blanked.
NOTE:
In EE mode, the closed captions are output superimposed on the input signal.
0000 BLANK
59.94Hz
0001 THRU
Turns on and off closed caption signals in the second field output from the SD SDI and
analog composite output during playback.
0: Signals are forcibly blanked.
1: Signals are not blanked.
NOTE:
In EE mode, the closed captions are output superimposed on the input signal.
0000 OFF
59.94Hz
0001 ON
60-25Hz
Specifies whether or not EDH is superimposed on SDI OUT signals.
0: Signals are not superimposed.
1: Signals are superimposed.
0000 OFF
59.94Hz
0001 AUTO
Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit.
0: ESR is forcibly set to off.
1: ESR is automatically turned on and off depending on operating mode.
0000 OFF
59.94Hz
0001 ON
Specifies whether or not the closed caption signal that is superimposed on the SD SDI
and analog composite input signals will be recorded.
0: Not recorded.
The EE output is also blanked.
1: A closed caption signal that is superimposed on an input signal is recorded.
0000 NORMAL
59.94Hz
0001 DARK
60-25Hz
Selects the compression method used during video recording.
0: Records using normal compression processing.
1: Records video suppressing compression video distortion that is generated by dark
areas that are about 10 IRE (70 mV) or less.
NOTE:
This setting is available in DVCPRO HD 720p mode recording.
0000 OFF Specifies whether or not UMID data should be recorded.
0001 ON 0: UMID data is not recorded.
1: Recorded.
0000 INT Specifies the generation method of UMID information that is recorded when setup menu
0001 EXT No. 690 (UMID REC) is set to ON.
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal.
Newly created UMID information is recorded when not superimposed on an input signal.
0000 BLANK Specifies the line that superimposes UMID data.
0001 12L
NOTE:
| |
• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502
0006 17L
VITCPOS-2.
| |
• Holding down the SEARCH button and pressing the RESET button will not restore the
0008 19L
factory defaults.
• UMID data is output before recorded VANC data. To output VANC data, set UMID
POS to a line other than that which superimposed the data or select "BLANK."
• During playback of DVCPRO HD native clip, UMID becomes NO-INFO.
Settings and brief function description
only
only
50Hz 23.98Hz 29.97Hz
only
only
29.97Hz
only
50Hz 29.97Hz 59-23Hz
only
59-23Hz 25Hz
60-24Hz 25Hz