Changing Thumbnail Display - Panasonic AJ-HPD2500 Operating Instructions Manual

Changing Thumbnail Display

The thumbnail screen can be customized to suit operating
conditions and improve efficiency.
Switching the type of information that is
displayed
1
4
3
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to select the clip type that
should appear under [THUMBNAIL].
ALL CLIP:
SAME FORMAT CLIPS: Show clips in the same
54
Clip Management: Thumbnail and Clip Management
2
Show all clips
format as the system
◆ NOTE:
• When 23.98, 24, 29.97, 59-23,
60-24, 25 or 60-25 is selected
in setup menu No. 25
(SYSTEM FREQ) only clips in
a format that can be recorded
appear.
SELECTED CLIPS:
MARKED CLIPS:
TEXT MEMO CLIPS:
SLOT CLIPS:
4
Press the SET button.
◆ NOTE:
These operations can also be performed using buttons.
• Press SLOT CLIP (SHIFT + IN) and the indication changes in the
following order each time these buttons are pressed:
SELECTED ➝ SLOT 1 ➝ SLOT 2 ... SLOT 6 ➝ SELECTED. (Only
slots with cards will appear.)
• Press ALL CLIP (SHIFT + OUT) to switch to ALL CLIP.
Show clips selected using
the SET button.
At this time the thumbnails
appear in selected order.
Use this function to change
the order clips are played
back.
Show clips to which shot
marks have been attached.
Show clips that contain text
memo data.
◆ NOTE:
When a text memo clip
appears, the following type of
thumbnails at the text memo
location in the row below may
be displayed as .
• An AVC-Intra clip with a
different SYSTEM FREQ.
setting
Show clips on P2 card in
slot No. n