Panasonic AJ-HPD2500 Operating Instructions Manual page 31

5.
P2 Card Slots
Insert P2 cards into these slots.
Firmly insert the card until the EJECT button pops out.
After inserting a card, flip the EJECT button to the right.
6.
EJECT button
Use this button to remove a P2 card inserted in a P2
card slot. Raise the button and press it in firmly. Do not
use the EJECT button when a P2 card access LED
flashes orange.
➝Refer to "P2 card access LEDs and P2 card status"
(page 42).
Introduction: Control Reference Guide
31