Connecting A Pc To This Unit; Switching To Usb Device Mode - Panasonic AJ-HPD2500 Operating Instructions Manual

Connecting a PC to This Unit

Switching to USB Device Mode

1,4
1
Press the MODE (SHIFT+REMOTE) button when
this unit is idle.
2
Select [USB DEVICE] in the confirmation dialog and
press the SET button.
"USB DEVICE" flashes on the LCD monitor to indicate that
the unit is entering the USB host mode. After the mode
switch, "USB DEVICE DISCONNECT" appears on the LCD
monitor. This message is replaced by a "USB DEVICE
CONNECT" message when the connection with the PC is
completed.
3
Use USB device mode operations.
4
Press the MODE (SHIFT+REMOTE) button to return
to regular mode.
◆ NOTE:
• Recording and playback are not available in the USB device
mode.
• In the playlist mode, the MODE (SHIFT+REMOTE) button is not
available during remote operation.
• In USB device mode, "USB" appears on the display panel.
• When using a Windows PC, install the driver using the supplied
CD-ROM.
2
Connections: Connecting a PC to This Unit
117