Panasonic AJ-HPD2500 Operating Instructions Manual page 181

Item
FR SUPER FR
No. DISP. No.
When set to 59.94 Hz,
29.97 Hz, 23.98 Hz,
24 Hz, 59-23 Hz,
0000
|
0008
|
502 VITC POS-2
0010
When set to 50 Hz,
25 Hz, 60-25 Hz
0000
|
0006
|
0015
0000
0001
504 RUN MODE
0000
0001
505 TCG REGEN
0002
0000
0001
0002
507 EXT TC SEL
0000
0001
0002
0003
508 BINARY GP
0004
0005
0006
0007
0000
0001
509 PHASE CORR
0000
0001
510 TCG CF FLAG
Setting
SUPER
DISP.
Specifies the position where the VITC signal will be inserted.
NOTE:
• You cannot select the same line as in setup menu No. 501 (VITC POS-1).
60-24 Hz
• The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected in
10L setup menu No.25 (SYSTEM FREQ).
| • You cannot select the same line as in setup menu No.692 (UMID POS).
18L • This setting is available only during analog composite output and SD SDI output.
• This setting does not return to the factory default even if you press the SEARCH button
|
and RESET button simultaneously.
20L
7L
|
13L
|
22L
REC Specifies an operating mode that advances the internal time code generator.
0: The internal time code generator is advanced only during recording.
FREE
1: When the power is on, the internal time code generator is advanced regardless of
operating mode.
NOTE:
When setup menu No. 040 (VFR REC) is set to ON, the time code advances only during
recording even when FREE is selected.
TC&UB Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN
mode.
TC
0: Regenerates both the time code and the user bit
UB
1: Regenerates only the time code
2: Regenerates only the user bit
EXT_L
59.94Hz
SLTC
Specifies the time code used when an external time code is used.
SVITC
0: LTC of the TIME CODE IN connector
1: LTC data attached to serial signal input to HD SDI IN
2: VITC data attached to serial signal input to HD SDI IN
NOTE:
When SLTC and SVITC are set, the VITC in the input video signal is used when an
analog composite or SD SDI input signal is selected.
000 Specifies user bit usage in time code generated by the TCG.
0: NOT SPECIFIED (character set not specified)
001
1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022)
010
2: UNASSIGNED 1 (undefined)
011
3: UNASSIGNED 2 (undefined)
100
4: UNASSIGNED 3 (undefined)
101
5: PAGE/LINE
110
6: UNASSIGNED 4 (undefined)
111
7: UNASSIGNED 5 (undefined)
OFF
59.94Hz
ON
Specifies whether or not LTC output from the TIME CODE OUT connector should be
phase controlled.
0: No phase control
1: Phase controlled
OFF
59.94Hz
ON
Sets the TCG CF flag.
0: OFF
1: ON
Settings and brief function description
50Hz 23.98Hz 24Hz
50Hz 23.98Hz 24Hz
50Hz 29.97Hz 25Hz
29.97Hz 25Hz only
only
29.97Hz 25Hz
60-25Hz only
Setup: Item Settings
181