Panasonic AJ-HPD2500 Operating Instructions Manual page 175

Item
FR SUPER FR
No. DISP. No.
0000
0001
041 LOOP REC
0000
0001
050 P.ON GUI
0002
0000
0001
0002
0003
051 GUI OUTPUT
0000
0001
052 GUI HOLD
069 CLOCK SET
Subscreen
0000
00 YEAR
0037
0001
01 MONTH
0012
0001
02 DAY
0031
Setting
SUPER
DISP.
OFF Specifies whether or not to make loop recording.
➝For details, refer to "LOOP REC Function" (page 43).
ON
0: Does not make loop recording
1: Makes loop recording
NOTE:
Turning the power off cancels this setting. The unit will then start up using the default
value (OFF) next time it is powered up.
OFF Specifies whether or not the thumbnail screen or playlist screen appears when the power
THUMB is turned on.
0: Does not display thumbnail screen and playlist screen.
PLYLST
1: Displays the thumbnail screen.
2: Displays the playlist screen.
LCD
59.94Hz
LCD&M
60-25Hz
LCD&S
Specifies whether the GUI screen will be output to ANALOG MONITOR OUT/SDI
ALL
MONITOR OUT/SDI OUT.
0: Not output (LCD monitor only)
1: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT
2: Output to LCD monitor and SDI OUT
3: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT, SDI OUT
NOTE:
• When 23.98 or 59-23 is selected in setup menu No. 25 (SYSTEM FREQ), the refresh
of the GUI screen output to SDI OUT may seem unnatural. Also, when the GUI screen
switches to the video screen (and vice versa), the output signal may be distorted.
• Some characters on the GUI screen output to ANALOG MONITOR OUT, SDI
MONITOR OUT may not be clear.
OFF
59.94Hz
ON
60-25Hz
Determines whether a switch to full screen mode will be made or the GUI will be retained
when thumbnail playback is started.
0: Switches to full screen mode.
1: Retains GUI.
NOTE:
• The GUI scroll bar and the yellow frame indicating cursor location is not available
during playback. The screen is refreshed when playback stops.
• The GUI retained screen may be distorted when clip playback format or the wide
screen information is changed.
Sets the internal clock.
NOTE:
Press the STOP or SET button to open the subscreen for setting the time. Change the
date in the subscreen and press the SET button to set the clock date. To exit the
subscreen without setting a date, press the STOP or EXIT button again.
2000 Sets the year.
| |
2037
JAN Sets the month.
| |
NOTE:
DEC
Setting a nonexistent day for February, April, June, September and November will
automatically set the equivalent day in the following month.
1 Sets the day.
| |
NOTE:
31
Setting a nonexistent day for February, April, June, September and November will
automatically set the first day in the following month.
Settings and brief function description
50Hz 23.98Hz 29.97Hz
only
50Hz 23.98Hz 29.97Hz
only
59-23Hz 25Hz
59-23Hz 25Hz
Setup: Item Settings
175