Automatic Recording Of Cards - Panasonic AJ-HPD2500 Operating Instructions Manual

Automatic Recording of Cards

Registering IN and OUT points makes possible automatic
recording (AUTO CAPTURE) between those two points.
1
Enter the mode that permits control of external
devices.
Press the PLAYER button when the unit is in the recording/
playback mode.
2
Select an area for capture.
• Use the following buttons to select an area for capture.
IN+ENTRY Registers IN points
IN+RESET Deletes IN points
OUT+ENTRY Registers OUT points
OUT+RESET Deletes OUT points
IN+GOTO Sends a CUE-UP command to move to an
IN point
OUT+GOTO Sends a CUE-UP command to move to an
OUT point
IN Checks an IN point (counter indication)
OUT Checks an OUT point (counter indication)
IN+OUT Checks a DUR (counter indication)
3
Hold down the SHIFT button and press the REC
button.
• The specified area is automatically registered on the
card.
• The PLAYER button flashes during operation.
• The current point is registered as an IN point if an IN point
has not been registered.
• Recording stops automatically when the OUT point is
reached.
If an OUT point has not been registered, recording
continues until the STOP button is pressed.
Connections: External Remote Control
129