Panasonic AJ-HPD2500 Operating Instructions Manual page 174

Item
FR SUPER
No. DISP.
026 PLY LST FMT
028 AVCHD FMT
031 OUT REF
032 REC REF
040 VFR REC
174
Setup: Item Settings
Setting
FR SUPER
No. DISP.
When set to 59.94 Hz
59.94Hz
0000 SYSFMT
Specifies the format used by the playlist.
0001 30PN
<In the DVCPRO HD format>
0002 24PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 REC FMT (HD).
1: 720/30PN (when set to 59.94 Hz)/720/25PN (when set to 50 Hz)
When set to 50 Hz
2: 720/24PN
0000 SYSFMT
<In the AVC-Intra format>
0001 25PN
0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 (REC FMT (HD)).
1: 1080/30PN (when set to 59.94 Hz)/1080/25PN (when set to 50 Hz) or 720/30PN (when
set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 1080/24PN or 720/24PN
NOTE:
• When 480i or 576i is selected in setup menu No. 020 (SYS FORMAT), a 30PN and
24PN selection is handled as a SYSFMT setting.
• The number of lines in the AVC-Intra format depends on the setting in the setup menu
No. 020 (SYSFORMAT).
• When a selection other than 59.94 or 50 is made in setup menu No. 25 (SYSTEM
FREQ), the format selected in menu No. 020 (SYS FORMAT) and No. 025 (REC FMT
(HD)) is used.
0000 PH
59.94Hz
0001 HA
Specifies AVCHD recording rate.
HG
0002
0: PH mode (approx. 21 Mbps)
HE
0003
1: HA mode (approx. 17 Mbps)
2: HG mode (approx. 13 Mbps)
3: HE mode (approx. 6 Mbps)
NOTE:
• Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
• In 720P mode, recording is always made in PH mode.
0000 AUTO
59.94Hz
REF
0001
Select reference for video output.
INPUT
0002
0: Uses the reference signal input to the REF connector as reference. When there is not
input to the REF connector, the selected video input signal is used as reference. When
there is no reference and video input signal, the internal clock is used.
1: The reference input signal is used as reference. If there is no such signal, the internal
clock is used.
2: The video input signal is used as reference. If there is no such signal, the internal clock
is used.
0000 NORMAL
59.94Hz
0001 SLTC
Specifies the reference to synchronize the frames for recording.
0: The input video signal is automatically identified and serves as reference.
1: The time code which is input to the SD I IN connector is identified and serves as
reference.
NOTE:
When the SLTC is selected, the following settings are necessary to validate the settings
for this item:
• Setup menu No. 25 (SYSTEM FREQ): 59.94
• Setup menu No. 020 (SYS FORMAT): 720p
• VIDEO IN (SHIFT+EDIT MODE) button on the unit: HDSDI
0000 OFF
29.97Hz
0001 ON
Specifies whether or not to make a VFR recording when the recording format is 720p.
0: Does not make VFR recording
1: Makes VFR recording
➝ Refer to "Recording From a Variable Frame-Rate Camera" (page 46).
Settings and brief function description
50Hz only
only
50Hz
50Hz 29.97Hz 25Hz
only
59-23Hz 60-24Hz 60-25Hz
only
only