Panasonic AJ-HPD2500 Operating Instructions Manual page 212

AVCHD warning information (when the AJ-YCX250G AVCHD codec board (optional) is
installed)
The following lists major warning messages displayed on the LCD monitor. For details on other warning messages, follow the
instructions given in the messages.
CANNOT BE USED DUE TO INCOMPATIBLE DATA.
CANNOT PLAY.
CANNOT SELECT MORE CLIPS.
CANNOT SET. THE NUMBER OF INDEXES HAS EXCEEDED THE
MAXIMUM LIMIT.
CARD ERROR. PLEASE REFORMAT.
CHECK CARD.
CONTROL DATA ERROR HAS BEEN DETECTED.
NO CARD
NO FILE.
REPAIR CLIP?
THE CLIP IS PROTECTED. PLEASE CANCEL PROTECTION.
THUMBNAIL DATA ERROR IS DETECTED.
UNABLE TO FORMAT.
WRITE PROTECT
■ Error indication
These messages appear when malfunctions occur with the unit or an SD memory card. If the problem cannot be solved by
turning the unit off and turning it back on, try replacing the card as directed, or consult your supplier.
Message
CANNOT RECORD
REC WARNING
SYSTEM ERROR
TURN POWER OFF
Continuous playback of multiple clips may not be smooth in the transition between clips.
In the following cases, playback may stop briefly in the transition between clips during continuous playback of multiple clips.
■ Multiple recording formats
Recording mode = PH mode
Playback format = 1080/60i (30P)
Recording format
PH 1080/60i
212
For Long and Trouble-Free Operation: Error Messages
Message
Indicates that an error occurred during shooting.
Indicates that an error occurred during recording. Rerecord the card. If the warning still persists, contact your
supplier.
Turn the power off if the warning continues.
Indicates that a system error occurred. Turn the power off and then turn it back on again.
If this message occurred during SD memory card access, for example when a clip was deleted, the SD
memory card may be damaged. Replace the SD card with a new one.
Use the AVCCAM Restorer, a repair utility, if this message is output during a repair.
➝ Refer to "Recovery of SD memory cards" (page 151).
Recording format
PH 1080/60i
Plays back smoothly.
This data conforms to a different standard and cannot be used.
Cannot play.
Too many clips selected to delete.
Cannot make settings since the number of indexes exceeds the limit.
Formatting failed. This card must be reformatted.
Check the card.
A control data error was detected.
No card is inserted.
The metadata file cannot be found.
Repair clip?
The clip is protected. Cancel protection.
A thumbnail data error was detected.
Cannot be formatted.
The card is write protected.
Description
Recording format
PH 720/60P
This format does not match
Video stops briefly during
the playback format and will
the switch between clips.
not be played back.
Description
Recording format
PH 1080/60i