System Info - Panasonic AJ-HPD2500 Operating Instructions Manual

Deleting and protecting clips
(OPERATION)
Use the steps below to delete or protect clips.
1
Press the MODE (SHIFT+REMOTE) button to switch
to the AVCHD mode.
➝Refer to "Switching to AVCHD mode" (page 153).
2
Press the MENU button.
3
Select [OPERATION] and press the SET button.
4
Press the up and down (4/5) cursor buttons to select
an item and press the SET button.
DELETE:
Deletes Clips.
ALL CLIPS:
SELECT:
NO:
◆ NOTE:
• Protected clips cannot be deleted.
• Deleting clips selected using ALL CLIPS may take time if the
clips are large.
CLIP PROTECT:
YES:
NO:
◆ NOTE:
• Note that formatting an SD memory card will delete protected
clips.
5
Press the MENU button to return to the thumbnail
screen.
Checking model number and serial number

(SYSTEM INFO)

Use this function to check the model number and serial
number of the unit.
1
Press the MODE (SHIFT+REMOTE) button to switch
to the AVCHD mode.
➝Refer to "Switching to AVCHD mode" (page 153).
2
Press the MENU button.
3
Use the cursor buttons to choose [SYSTEM INFO]
and press the SET button.
AVCHD Recording and Playback: Using an Optional AVCHD Board
Deletes all clips. Select [YES]/[NO] and
press the SET button.
Deletes selected clips. Select [SELECT:],
press the SET button, move the cursor to
the clip you want to select, and then
press the SET button again. The selected
clip will be indicated by an orange frame.
(This allows you to make multiple
selections.) Pressing the SET button a
second time cancels the selection.
Pressing the ENTRY button after
selecting deletes the clip.
The previous screen reappears.
Protects clips or releases protection.
Move the cursor to the clip to be
protected, then press the SET button (a
symbol mark is displayed). Or move the
cursor to the protected clip and press
the SET button to release protection (the
symbol mark disappears). Repeat this
procedure to protect a clip or release
protection of a clip.
The previous display returns.
155