Panasonic AJ-HPD2500 Operating Instructions Manual page 189

Memory card recorder
Hide thumbs Also See for AJ-HPD2500:
Table of Contents

Advertisement

Item
FR
SUPER
FR
No.
DISP.
No.
For AJ-HPD2500P
0000
0001
0002
776
REF LEVEL
For AJ-HPD2500E
0000
0001
0002
0000
0001
778
AUD OUT DLY
0000
0001
0002
782
EMBD CH SEL
0000
0001
785
PB MIX
Subscreen
0000
01
PB CH1
0001
0002
0000
02
PB CH2
0001
0002
0000
03
PB CH3
0001
0002
0000
04
PB CH4
0001
0002
0000
0001
790
VOL SEL
Setting
SUPER
DISP.
Specifies the standard level.
0: –20 dB
FS-20
1: –18 dB
FS-18
2: –12 dB
FS-12
FS-20
FS-18
FS-12
OFF
23.98Hz
ON
Determines whether or not the output timing of analog audio output, headphones output,
monitor output and AES/EBU output are delayed to synchronize them with SDI output.
0: Not delayed
The output is synchronized with LCD monitor and VIDEO OUT output.
1: Delayed
The output is synchronized with SDI output.
NOTE:
LCD monitor and VIDEO OUT are output about 66 msec earlier than SDI output.
CH1-4
59.94Hz
CH5-8
60-25Hz
CH1-8
Selects channels to multiplex on the SD SDI output.
0: Outputs four channels (CH1-4).
1: Outputs four channels (CH5-8).
2: Outputs the CH1-8 channels.
NOTE:
• Four channels (CH1-4) are multiplexed during DVCPRO and DVCPRO50 playback.
• Some devices may not be able to receive 8 channels. Check the specifications of the
receiving equipment before setting CH1-8.
• Invalid signal is output at 24 Hz and 60-24 Hz.
OFF
Sets a mix of analog and SDI audio output.
ON
NOTE:
Press the STOP or SET button to open a subscreen and select the channels used in
mixing audio output. To exit the subscreen, press the STOP or SET button again.
CH1
Specifies the playback channels that will be output via CH1.
CH1+2
CH1+3
CH2
Specifies the playback channels that will be output via CH2
CH1+2
CH2+4
CH3
Specifies the playback channels that will be output via CH3.
CH3+4
CH1+3
CH4
Specifies the playback channels that will be output via CH4.
CH3+4
CH2+4
CH1-4
Specifies operation of the recording level controls.
0: CH1 to CH4 only are variable, CH5 to CH8 are UNITY level.
CH1-8
1: In addition to CH1 to CH4, which are variable, CH5 to CH8 also become variable,
being linked to CH1 to CH4 operation.
Settings and brief function description
24Hz
59-23Hz
60-24Hz
50Hz
23.98Hz
29.97Hz
only
only
59-23Hz
25Hz
Setup: Item Settings
189

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj-hpd2500pAj-hpd2500e

Table of Contents