Panasonic AJ-HPD2500 Operating Instructions Manual page 146

Command table
Operation control commands
◆ NOTE:
• The initial [STX] and final [ETX] codes in send commands and return (completion) messages are not included in the table.
• A return (completion) message returns [ACK] when data is received. Then an execution message is returned. The execution messages are
described in the table below.
• When data reception is prohibited or for commands not supported, first [ACK] is returned, then ER001 (invalid command) is returned.
Command
STOP
PLAY
*1
REWIND
*1
FAST FORWARD
REC
*2
SHTL FORWARD
*2
SHTL REVERSE
Device Select
*1: Maximum speed depends on setup menu No. 102 (FF. REW MAX) setting. For details, refer to each setup menu.
*2: 16× and 32× speed are restricted by setup menu No. 101 (SHTL MAX) setting.
146
Connections: RS-232C Interface
Operation Send command
Stops current operation OSP
Start of playback OPL
Fast reverse ORW
Fast forward OFF
Start of recording ORC
Forward shuttle OSF:data
Reverse shuttle OSR:data
Device select $NI:data
Argument (data) Return (completion)
message
OSP
OPL
ORW
OFF
ORC
0: STILL OSF
1:×0.03
2:×0.1
3:×0.2
4:×0.5
5:×1
6:×2
7:×4
8:×8
*2
9:×16
*2
A:×32
Same as the OS OSR
Fargument (data)
0: Normal (LOCAL) $NI
1:LAN
2:USB (DEVICE)
3: Normal (REMOTE)
5: BROWSER
6: AVCHD