Panasonic AJ-HPD2500 Operating Instructions Manual page 188

Item
FR SUPER
No. DISP.
728 REC CH4
731 PB FADE
732 EMBEDDED AUD
750 A CH1/2 SEL
767 METER SELECT
774 AVCHD A CH
775 25M REC CH
188
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 CH1 Specifies the input signal to be recorded on the audio CH4.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
0003 CH4
2: Audio input CH3 signal
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 AUTO Specifies audio processing to be performed between clips and edit points created using
playlist or Edit Copy.
0001 CUT
0: Depends on recording status.
201).)
1: Forcible cut.
NOTE:
AVCHD playback (option) is disabled.
0000 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
0001 ON output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
0000 CH1&2 Selects the audio signal channels to be output to ANALOG AUDIO CH1/CH2 connectors.
0: CH1/CH2
0001 CH3&4
1: CH3/CH4
0002 CH5&6
2: CH5/CH6
0003 CH7&8
3: CH7/CH8
0000 CH1-4 Selects the audio channels to be indicated by the audio level meter.
0: CH1-4
0001 CH5-8
1: CH5-8
0000 CH1&2
59.94Hz
0001 CH3&4
Specifies audio channels for AVCHD recording.
0002 CH5&6
0: Audio selected as REC CH1 and REC CH2 will be recorded as CH1 and 2.
0003 CH7&8
CH1 and CH2 audio are recorded as CH1 and CH2 during dubbing from P2 cards to
0004 12&34
AVCHD.
0005 13&24
1: Audio selected as REC CH3 and REC CH4 will be recorded as CH1 and 2.
CH3 and CH4 audio are recorded as CH1 and CH2 during dubbing from P2 cards to
AVCHD.
2: Audio CH5 and 6 will be recorded a CH1 and 2.
3: Audio CH7 and 8 will be recorded a CH1 and 2.
4: Audio selected as REC CH1 and REC CH2 are mixed and recorded as CH1, audio
selected as REC CH3 and REC CH4 are mixed and recorded as CH2.
5: Audio selected as REC CH1 and REC CH3 are mixed and recorded as CH1, audio
selected as REC CH2 and REC CH4 are mixed and recorded as CH2.
NOTE:
Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
0000 2CH
59.94Hz
0001 4CH
Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV
(25 Mbps) recording.
0: Records on two channels.
1: Records on four channels.
NOTE:
DVCPROHD, AVC-Intra50 and AVC-Intra100 always record on 8 channels, and
DVCPRO50 always records on 4 channels.
Settings and brief function description
(Refer to the section "Audio V Fade Function" (page
only
50Hz
50Hz only