Panasonic AJ-HPD2500 Operating Instructions Manual page 221

VIDEO INPUT
Analog composite input:
BNC × 1 (loop through × 1), automatic
75 Ω termination provided,
1.0 V[P-P] (75 Ω)
Reference input: Automatic switching of black burst/HD 3
value SYNC, BNC × 1 (loop through × 1),
automatic 75 Ω termination provided
SDI input: BNC × 1, complies with SMPTE 292M/
296M/299M during HD SDI input, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-
4 during SD SDI input
VIDEO OUTPUT
SD analog composite MON output:
BNC × 1 (superimpose ON/OFF)
HD SDI/SD SDI output (switchable):
BNC × 2, complies with SMPTE 292M/296M/
299M during HD serial digital output, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-4
during SD serial digital output
AUDIO
DIGITAL AUDIO
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing: 16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB
(at the reference level)
Dynamic range: Better than 85 dB
(1 kHz emphasis off, "A" weighted)
Distortion: Less than 0.1 %
(1 kHz, emphasis off, reference level)
Crosstalk: Less than –80 dB
(1 kHz, between 2 channels)
Headroom: 12/18/20 dB selectable
De-emphasis: T1 = 50 µs, T2 = 15 µs (auto on/off)
AUDIO INPUT
Analog input (CH1, CH2):
XLR × 2, 600 Ω/high impedance selectable
(factory setting: high impedance)
+4/0/–3/–20 dBu selectable
Digital input: BNC × 4 (CH1/2, CH3/4, CH5/6, CH7/8)
AES/EBU format SMPTE276M
SDI input: BNC × 1, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
SD SDI MON output:
BNC × 1
Complies with SMPTE259M-C/272M-A, ITU-R
BT.656-4
VIDEO ADJUSTMENT RANGES
Video output gain: Can be set to –∞ to +3 dB or –∞ to +6 dB
depending on menu
Video output chroma gain:
–∞ to +3 dB
Video output HUE (chroma phase):
±30°
Video output setup level:
±10 %
Video output sync phase:
±15 µs
Video output SC phase:
±180°
AUDIO OUTPUT
Digital output: BNC × 4 (CH1/2, CH3/4, CH5/6, CH7/8)
AES/EBU format SMPTE276M
SDI output: BNC × 2, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
SD SDI MON output:
BNC × 1
Complies with SMPTE259M-C/272M-A,
ITU-R BT.656-4
Analog output: XLR × 2, low impedance
+4/0/–3/–20 dBu selectable
Monitor output: XLR × 2, low impedance
+4/0/–3/–20 dBu selectable
Stereo mini jack (3.5 mm diameter), 8 Ω,
Headphones:
variable level
221
Specifications