Panasonic AJ-HPD2500 Operating Instructions Manual page 211

Item Message
DIFFERENT SYSTEM
FREQUENCY!
DURATION
LIMITATION!
ILLEGAL FILE!
LACK OF REC
CAPACITY!
NO CARD!
NO FILE!
NO SPACE!
NOT AVAILABLE
Playlist
FORMAT!
NOT SELECTED!
NUMBER OF EVENT
LIMITATION!
NUMBER OF FILE
LIMITATION!
READ ONLY
PLAYLIST VERSION!
R-OUT POINT IS NOT
AVAILABLE IN
INSERT MODE
WRITE PROTECTED! The specified card is write protected.
Error information
Error
No. Message
E-30 TURN POWER OFF
E-37 COMM ERROR
E-38 SYSTEM ERROR
E-55 OPT SYS ERROR
E-56 OPT NOT RESPONSE
E-57 OPT HALT
Description
Some files have a different system frequency.
The selected process cannot be performed
because playlist duration exceeds 24 hours.
The playlist is not in a format that can be loaded
into the unit.
The card selected for Edit Copy does not have
enough capacity.
The specified card does not exist.
The specified file does not exist.
There is not enough space on the card.
Cannot edit data in the current format.
No clip is selected.
The number of events on a track has reached the
upper limit.
The number of playlist files has reached the
upper limit.
The playlist file is opened as read only because it
is in a different version.
An insert edit cannot use a recorder OUT point.
Displayed when an error occurs in reading and writing card data.
To continue operation, turn the power off and then back on again.
Displayed when a system controller command was not complied to.
To continue operation, turn the power off and then back on again.
Displayed when the fan motor stops.
To continue operation, turn the power off and then back on again.
Displayed when an AJ-YCX250G AVCHD codec board (optional) malfunctions. Turn
the power off and then back on again.
Displayed when an AJ-YCX250G AVCHD codec board (optional) does not respond
to communications. Turn the power off and then back on again.
Displayed when communications from an AJ-YCX250G AVCHD codec board
(optional) cannot be updated. Turn the power off and then back on again.
Use only files with the same system frequency.
Delete data to reduce the duration to less than 24
hours to process.
Use a playlist file in a format that can be loaded into
the unit.
Insert a card with sufficient capacity.
Insert the card before attempting to process it.
Use SAVE AS to save or insert a normally operating
card.
Use a compatible playlist format.
Select the clip in the player thumbnail screen.
The upper limit of the number of events on each
track is 100. Operate within this limit.
One card can store up to 999 playlist files. Delete
files no longer needed or use a new card.
Playlists created on the AJ-SPD850, AJ-HPM100,
AJ-HPM110 or AJ-HPS1500 can only be opened as
read only files. To edit such files on this unit save
them out.
Select some point other than the recorder OUT point
in editing.
Insert write-enabled media.
Description
For Long and Trouble-Free Operation: Error Messages
Measure
Operation
STOP
STOP
STOP
STOP
STOP
STOP
211