Revising Voice-Overs - Panasonic AJ-HPD2500 Operating Instructions Manual

Voice-over from playback status
2,3
1
Find a location before the starting point of the voice-
over.
Use the operation buttons or the search dial to move to a
location before the starting point of the voice-over.
2
Use the PLAY button to start playback.
3
Hold down the REC button and press the PLAY
button where you want to start a voice-over.
This starts audio recording.
Use the audio volume controls (VR) as necessary to adjust
the playback sound level.
4
Press the STOP button to end the voice-over.
◆ NOTE:
• When the 24PN playlist format is set in setup menu No. 026 (PLY
LST FMT), the audio IN and OUT points are set in 4-frame
increments. If the recording starts or stops elsewhere, the IN
and OUT points are automatically corrected to fall within the
recording range.

Revising Voice-Overs

Like normal events, audio events such as voice-overs can
also be revised.
➝Refer to "Revising Registered Events" (page 99).
108
Editing: Recording Voice-Overs
4 3 1