Table of Contents
Advertisement
Preparation
Connecting this unit to the Camera Head
(CAM Mode)
∫ Attaching the Camera head option cable (optional)
Be sure to turn off the unit before attaching the Camera head option cable.
A Camera head option cable
1
Insert Camera head option cable D into this unit's CAMERA
terminal and the Camera Head connecting terminal.
≥ Align notch A of the terminal of the Camera head option cable and guide B
of the connecting terminal to insert.
2
Turn the Camera head option cable terminal ring C
clockwise.
≥ Fix firmly so that there is no looseness.
≥ This unit will start up in the CAM Mode when it is turned on after connection.
The Camera Head is turned on and recording is possible.
∫ Removing the Camera head option cable
Be sure to turn off this unit before removing the Camera head option cable.
1
Loosen the ring on the terminal of the Camera head option cable by turning it
counterclockwise.
2
Hold the ring on the terminal of the Camera head option cable and pull it straight out.
48
DVQX1265
Advertisement
Table of Contents
